Delta Tau COMPACT UMAC Manuel D’Utilisation
UMAC-CPCI Turbo CPU Board Hardware Reference Manual
W1: Flash IC Power Supply Select Jumper
E Point and
Physical Layout
Location Description
Default
B-1
(Note: This jumper is set at the factory and possibly hard soldered.
Users should not change this jumper.)
Jump pin 1 to 2 to select 3.3V supply for flash memory IC in U10.
Jump pin 2 to 3 to select 5V supply for flash memory IC in U10.
Users should not change this jumper.)
Jump pin 1 to 2 to select 3.3V supply for flash memory IC in U10.
Jump pin 2 to 3 to select 5V supply for flash memory IC in U10.
Setting dependent on
flash IC used.
flash IC used.
14
Jumper Descriptions