Delta Tau GEO BRICK LV Manuel D’Utilisation
Geo Brick LV User Manual
PinOuts and Software Setup
112
Note
At this point, you should be able to move the motor/encoder shaft by
hand and see ‘motor’ counts in the position window.
hand and see ‘motor’ counts in the position window.
Counts per User Units (Technique 3)
With technique 3, the user should expect to see 2
ST
counts per revolution for rotary encoders, and
1/Resolution counts per user unit for linear scales in the motor position window.
Examples:
32-bit rotary encoder (20-bit Singleturn): 2
20
= 1,048,576 cts/rev
0.1-micron linear scale: 1/0.0001= 10,000 cts/mm