D-Link SKYPE DPH-50U Manuel D’Utilisation

 

You can continue to use the telephone handset connected to the DPH-50U 
VoIP USB Phone Adapter to make and receive standard telephone calls as 
you used without any change. To make a standard phone call, just pick up the 
handset and dial as you normally would. To answer (receive) a standard 
phone call just pick up the handset when the phone rings. 
 
When you receive an incoming Skype™ call, the handset connected to the 
DP-50U will ring. If you handset supports Alphanumeric Caller ID, then the 
Skype username will be displayed on the handset’s screen where the 
standard caller ID information is displayed. To answer the call, just pick up the 
handset and speak as you normally would. To end the call, simply hang up the 
handset as you normally would. 
 
If you have SkypeOut™, you can use the DPH-50U connected handset to 
make SkypeOut™ calls by picking up the handset, pressing ##, to indicate to 
the DPH-50U that this is not a standard call but a Skype call, dialing as per 
the SkypeOut™ recommended dialing sequence, 00 + country code + 
telephone number (e.g. 001 617 555 1212) and pressing the asterisk (*) key. 
 
In order to make a call to a Skype™ contact, you will need to use the Skype™ 
program to assign a speed dial (as described in the next section) to each 
person you would like to call from the DPH-50U connected handset. Then 
simply pick up the handset, press ##, to indicate to the DPH-50U that this is 
not a standard call but a Skype call, you will hear a new dial-tone, press the 
speed dial number (e.g. 22) and then press the asterisk (*) key. 
 
 

This section describes how to setup speed dials in Skype™. This is required 
in order to use a DPH-50U connected handset to dial to a Skype™ contact. It 
is not required for making SkypeOut™ calls using a DPH-50U connected 
handset.