BMW 2011 M3 Convertible Manuel Du Propriétaire
195
Inserting/removing the
snap-in adapter*
1.
Press button
1 and remove the cover.
2.
Insert the snap-in adapter in the front and
press it downward until it engages.
press it downward until it engages.
To remove the snap-in adapter:
Press button
Press button
1.
Inserting mobile phone
1.
If applicable, remove the protective cap
from the mobile phone's antenna connector
so that the mobile phone can engage in the
snap-in adapter.
from the mobile phone's antenna connector
so that the mobile phone can engage in the
snap-in adapter.
2.
With its buttons facing upward, slide the
mobile phone up towards the electrical con-
tact points and press it downward until it
engages.
mobile phone up towards the electrical con-
tact points and press it downward until it
engages.
The mobile phone's battery is charged as soon
as the vehicle is in radio readiness or the steer-
ing is unlocked.
as the vehicle is in radio readiness or the steer-
ing is unlocked.
To conserve vehicle battery power, you
should avoid using the mobile phone
should avoid using the mobile phone
when the ignition is switched off.
<
Removing mobile phone
Press the button.
Online Edition for Part no. 01 41 2 604 638 - © 02/10 BMW AG