BMW 2009 Z4 sDrive30i Manuel Du Propriétaire

 209

Have any work on the xenon lamp system, 
including bulb replacements, performed 

only by a BMW center or a workshop that works 
according to BMW repair procedures with cor-
respondingly trained personnel. Otherwise, if 
such work is carried out improperly, the high 
voltage in the system presents the danger of 
fatal injuries.

<

H8 bulb, 35 watts

1.

Switch off the lamps and take the remote 
control out of the ignition lock.

2.

Turn the upper access cover to the left and 
remove it, see arrow.

3.

Turn the bulb by approx. 90°, see arrow 

1, 

and pull it out, see arrow 

2.

4.

Disconnect the plug, change the bulb and 
reconnect the plug.

5.

Insert the bulb and turn it until it stops.

6.

Screw on the access cover tightly by turn-
ing it to the right.

Be careful when attaching the access 
cover; otherwise it may leak, causing 

damage to the headlamp system.

<

P24W bulb, 24 watt

1.

Turn the wheel outwards.

2.

Turn both locks in the wheel house to the 
left and remove the cover.

3.

Turn the bulb holder to the left and 
remove it.

4.

Turn the bulb to the right, see arrow, and 
remove it.

5.

Change the bulb and screw it into the bulb 
holder toward the left.

6.

Insert the bulb holder and turn it to the right.

7.

Reattach the cover.

Online Edition for Part no. 01 41 2 602 116 - © 01/09 BMW AG