BMW 2009 M6 Coupe Manuel Du Propriétaire

 85

5.

Select "M Dynamic Mode" and press the 
controller.

You can also activate and deactivate the 
M Dynamic Mode with the MDM button.

Press the   button on the steering wheel or the 
MDM button

again; the MDM indicator lamp 

goes out.

To maintain vehicle stability, drive with 
the system activated whenever possi-

ble.

<

When rocking free or starting off from deep 
snow or on loose road surfaces, it can be useful 
to briefly deactivate DSC.

Press the DSC OFF button; the DSC indicator 
lamp lights up continuously. DSC and MDM are 
deactivated.
A message appears on the Control Display. 
Please note any supplementary information 
that appears there.
Manual transmission

:

Press and hold the MDM button.
Under unfavorable traction conditions, the 
engine output may be briefly reduced even 
when DSC is deactivated.

Press the DSC OFF button; the indicator lamp 
in the instrument cluster goes out.
You can also activate and deactivate DSC with 
the   button on the steering wheel, refer to 
MDrive on page

Manual transmission

:

Press the MDM button.

The warning lamp for the brake system 
lights up yellow, together with the indi-
cator lamps for ABS, DSC, and for the 
Tire Pressure Monitor or Flat Tire Mon-
itor. A message appears on the Control 
Display. The driving stability control 
systems have failed. While you may 
continue, you should remember to pro-
ceed cautiously and drive defensively 
while avoiding full brake applications. 

The Tire Pressure Monitor or the Flat Tire Mon-
itor is also malfunctioning. Have the system 
checked as soon as possible.

Online Edition for Part no. 01 41 2 600 775 - © 08/08 BMW AG