BMW 2007 650i Convertible Manuel Du Propriétaire

Driving

Automatic downshifting and prevention of
incorrect shifting even in sequential opera-
tion

Acceleration assistant, refer to page

Selector lever positions

R: Reverse gear

N: Neutral, idle

One-touch functions for Sequential mode:
+: manual upshifting
–: manual downshifting

D: activate/deactivate the Drive mode

The transmission automatically shifts
into N if the driver's door is opened with

the engine running and neither the pedals, the
shift paddles nor the selector lever are oper-
ated.
This is signaled by an acoustic signal and the
flashing display N in the instrument cluster; a
message appears on the Control Display.

Gear display

R N 1 to 6
The currently engaged gear is displayed pre-
ceded by a D in Drive mode.

This display is your only way to be sure
the desired selector lever position is actu-

ally engaged.

Shiftlock

Press the brake pedal before shifting out of N;
the shift command will not be executed unless
the brake is applied.

R Reverse

Select only when the vehicle is stationary.

Sequential mode

After every engine start, as soon as the selector
lever is pushed to the right and the brake pedal
is pressed, the Sequential mode is activated.
You can shift up and down using the shifting
paddles or the selector lever. You do not need
to remove your foot from the accelerator to do
so.
It is also possible to start off in second gear, e.g.
in slippery conditions.
In the following situations, SMG thinks for you:

Upshifts and downshifts are executed only
when they will result in a plausible combina-
tion of engine and vehicle speed; thus, for
example, the system will not execute a
downshift that would cause the engine to
overrev.

When the vehicle is stationary, the trans-
mission automatically downshifts into first
gear.

Shortly before dropping below a gear-
dependent minimum speed, the transmis-
sion downshifts automatically even without
your intervention.

D Drive mode

In the Drive mode, all forward gears are shifted
automatically.
To switch from Sequential to Drive mode:
Briefly press the selector lever to the right
toward D.