BMW 2006 325xi Sedan Manuel Du Propriétaire
Everything under control
82
Starting, stopping or resetting
>
Select "Start" and press the controller.
The stopwatch starts at the displayed time.
The stopwatch starts at the displayed time.
>
Select "Reset" and press the controller.
The stopwatch is reset and restarts if it was
running beforehand.
The stopwatch is reset and restarts if it was
running beforehand.
>
Select "Stop" and press the controller.
This stops the timer.
This stops the timer.
Taking an interim time reading
Select "Interim time" and press the controller.
The interim time appears below the ongoing
primary stopwatch count.
The interim time appears below the ongoing
primary stopwatch count.
All of the remaining functions remain
available at all times while the stopwatch
available at all times while the stopwatch
is running. The stopwatch continues operation
in the background.
in the background.
<
Altering settings
Language on the Control Display
The language on the Control Display can be set,
refer to the concept on page
refer to the concept on page
. The setting is
stored for the remote control currently in use.
1.
Open the start menu.
2.
Press the controller to open the menu.
3.
Select "Display settings" and press the
controller.
controller.
4.
If necessary, move the highlight marker to
the uppermost field. Turn the controller
until "Languages" is selected and press the
controller.
the uppermost field. Turn the controller
until "Languages" is selected and press the
controller.
5.
Select "Text language" and press the con-
troller. You can switch to another language
troller. You can switch to another language
for the display texts and navigation mes-
sages.
sages.
6.
Select and activate the desired language by
pressing the controller.
pressing the controller.
Brightness of the Control Display
The brightness is automatically adapted to the
ambient lighting conditions. Note, however,
that you can change the basic setting while the
low beams are switched on. The setting is
stored for the remote control currently in use.
ambient lighting conditions. Note, however,
that you can change the basic setting while the
low beams are switched on. The setting is
stored for the remote control currently in use.
1.
Open the start menu.
2.
Press the controller to open the menu.
3.
Select "Display settings" and press the
controller.
controller.
4.
Select "Brightness" and press the control-
ler.
ler.
5.
Turn the controller until the desired setting
is selected.
is selected.
Online Edition for Part-No. 01 41 0 159 816 - © 09/05 BMW AG