BMW 2004 745Li Sedan Manuel Du Propriétaire
Driving
66
ized. The indicator lamp
in the
Info Display lights up red
>
Releasing: the parking brake is ready
for operation. The indicator
lamp
for operation. The indicator
lamp
in the Info Display goes out.
Automatic transmission
with Steptronic
with Steptronic
While you can drive as with any conven-
tional automatic transmission, you also
enjoy the option of shifting manually at the
steering wheel, refer to page
tional automatic transmission, you also
enjoy the option of shifting manually at the
steering wheel, refer to page
Transmission range selection
P R N D
Program display
S or M1 – M6
Buttons on the steering wheel
Press briefly to proceed through a selec-
tion sequence consisting of the automatic
program, the sport program, and the man-
ual mode.
tion sequence consisting of the automatic
program, the sport program, and the man-
ual mode.
Steptronic:
Upshifting and downshifting, refer to Sport
program and manual operation.
Upshifting and downshifting, refer to Sport
program and manual operation.
Selecting transmission range
The selector lever is at the center
position. To select transmission
position. To select transmission
ranges D, R or N, always start by pulling
toward the steering wheel, arrow 1, then
press up or down. Note the information
provided in the Info Display.
toward the steering wheel, arrow 1, then
press up or down. Note the information
provided in the Info Display.
<
>
Range D or R:
Press the selector lever up or down,
continuing to apply pressure to move it
past the resistance point
Press the selector lever up or down,
continuing to apply pressure to move it
past the resistance point
>
Neutral N:
Press the selector lever as far as the
resistance point
Press the selector lever as far as the
resistance point
>
Park P:
Press button P, arrow 2.
Press button P, arrow 2.
The selector lever immediately returns to
the center position when released.
the center position when released.
With the vehicle stationary, press the
brake pedal before shifting out of P
brake pedal before shifting out of P
or N; the shift command will not be exe-
cuted unless the brake is applied: shiftlock.
To prevent the vehicle from creeping after
you select a range, maintain pressure on
cuted unless the brake is applied: shiftlock.
To prevent the vehicle from creeping after
you select a range, maintain pressure on
Online Edition for Part No. 01 41 0 157 670 - © 08/03 BMW AG