Emerson E2 Manuel D’Utilisation

rated tag at the bottom that may be removed and 
affixed to your form. Tear this tag off and stick it 
in the Neuron ID blank on the sheet of paper. If 
the perforated tag has already been removed, 
write the ID number in the blank.

When all Neuron ID numbers have been collected, 

return to the E2 and enter the Neuron ID numbers for each 
device. To commission a device, move the cursor to the 
device to be commissioned and press 

 (Set Address).

A menu will appear on the screen, giving you the 

option of either pressing the service button, entering the 
Neuron ID by hand, or cancelling and returning to the 

main screen. Press 



 to select the manual entry option 

and bring up the dialog box shown in Figure 10-32.

Enter the device’s Neuron ID as it appears on the form 

you created, and press 



. The E2 will then look for 

the controller with the Neuron ID you entered. If it is 
found, the E2 commissions the device, and you may move 
on to commissioning the next device. 

If E2 does not find it, the display will read “ERROR - 

Controller with specified Neuron ID did not respond.” 
This could be caused by an improperly entered number, or 
it could be caused by a problem with the device’s network 
connections or power connections.

When all devices are commissioned, keep the form 

with the Neuron ID stickers in an easily accessible place 
so that it may be referred to if necessary for board remov-
als, replacements, or troubleshooting.

Some applications in the E2 are only available when 

activated with a license key that is obtained through Emer-
son Retail Solutions. Licensing allows the user to activate 
certain features in the E2.

To obtain a license for a feature, go to the TCP/IP 

setup screen and obtain your E2 controller’s MAC 

Address. Press 



 + T, or from the Main Menu:

1.

Press 



 (System Configuration)

2.

Press 

 

(Remote Communications)

3.

Press 



 (TCP/IP Setup) to open the TCP/IP 

Setup screen and locate your E2’s MAC address 
(circled in Figure 10-33):

4.

Call Emerson Retail Solutions Customer Service 
at 770-425-2724 and have your MAC Address 
ready in order to obtain your unique license key.

Once you have received your unique license key from 

Customer Service, you can now activate the licensed fea-
ture(s) from the License Report screen. The License 
Report screen displays that E2 controller’s unit type and 
firmware version, the list of all licensed features on that 
E2, the current number and maximum number of each of 
those applications allowed, and which additional features, 
(that require a license key), have been enabled.

From the Main Menu:

1.

Press 



 (System Configuration)

2.

Press 



 (Licensing)

3.

Press 

 (Add Feature)