Emerson E2 Manuel D’Utilisation

Page de 283
I/O Network Boards and Peripherals
Hardware Overview
 • 
2
-
9
2.2.6
4AO Analog Output Board
The 4AO Analog Output Board (P/N 815-3030) (Fig-
ure 2-15) is configured with four analog output connec-
tions that provide a variable voltage signal to any of four 
analog devices that may be controlled by a single E2. Two 
4-20mA outputs are provided for channels 1 and 2. The 
4-20mA outputs provide a variable current for applications 
that are either externally powered or that require power 
from the 4AO board.
Figure 2-15
 - 4AO Analog Output Board (P/N 815-3030)
4
5
7
8
9
Transmitting (TX ) and Receiving (RX) LEDs
Hand-held Terminal (HHT) Jack
8
9
Alarm and Status Indicator LEDs
4-20mA Channels (2)
Analog Outputs (4)
2.2.7
8DO Digital Output Board 
and PMAC II Anti-Sweat Controller
For control of anti-sweat heaters, Emerson Retail Solu-
tions supplies the 8DO Digital Output board (P/N 810-
3050
). The 8DO has eight outputs which may pulse up to 
150mA at 12VDC.
Since the 8DO is primarily designed to control anti-
sweat heaters, the 8DO is the heart of Emerson Retail 
Solutions’ Pulse Modulated Anti-Sweat Control (PMAC 
II) panel. The PMAC II (P/N 851-1000) provides 16 chan-
nels of anti-sweat control circuitry. The PMAC II panel 
combines the 8DO with high-capacity relays in a single 
enclosure, providing 256 total amps of anti-sweat heater 
operation. 
The 8DO is shown in Figure 2-16. The PMAC II is 
Figure 2-16
 - 8 DO Digital Output Board
Figure 2-17
 - PMAC II Anti-Sweat Control Panel