Brother FAX-775Si Guide D’Installation Rapide

      R E M O T E   F A X   O P T I O N S

When Fax Forwarding is set to ON, your fax machine stores the received fax in 
memory. Then your fax machine phone number you’ve programmed, and forwards 
the fax message.

Press Menu/Set, 8, 1.

Press 

  until the LCD shows 

, and then press Menu/Set. 

Enter the number of the fax machine where faxes 
will be forwarded (up to 20 digits), and then 
press Menu/Set.

Press Stop/Exit.

If you set Fax Storage to ON, you will be able to retrieve fax messages from another 
location, using Fax Forwarding, Paging, or Remote Retrieval functions. The LCD will 
indicate when you have a fax stored in memory.

Press Menu/Set, 8, 2. 

Press 

 to select ON (or OFF), and then 

press Menu/Set.

Press Stop/Exit.

If you press 1, all fax data is erased and Fax Storage is turned off.  If you press 2, data 
is not erased and Fax Storage remains on. (See Printing a Fax in Memory, page 5-6.)

Enter your Remote Access Code when the fax machine picks up your call, so you can 
access features remotely.  The access code is preset to 1 5 9 

, but you can change this.

Press Menu/Set, 8, 3. (See Operation from 
External or Extension Telephone, page 5-5.)

Enter a three-digit number from 000 to 999. The “

” cannot be changed.

Do not use the same digits that appear in your Fax Receive or Telephone Answer Code.

Press Menu/Set.

Press Stop/Exit.

If there are faxes in memory when you turn the 
Fax Storage OFF, the LCD prompts you to 
erase any faxes in memory.

1.FAX FWD/PAGING

FAX FORWARD?

or

FWD#:

2.FAX STORAGE

or

ERASE ALL FAX?
1.YES 2.NO

3.REMOTE ACCESS