Bosch Appliances Home Security System DS7400XIV4-EXP Manuel D’Utilisation

DS7400XiV4-EXP | User Guide | 6.0   Day to Day Operations 

EN | 11 

 

 

Bosch Security Systems | 6/05 | 4998154961B 

 

6.1.5 

Maximum Security Arming 

Maximum security arming is used when no one is still in the building, all zones are to be armed, an exit delay is 
in effect, but no entry delay is in effect so an alarm 

does occur upon entry.  

The green Status LED must be lit and, if using a text keypad, “Ready to Arm” must be displayed. If the green 
LED is not on or the keypad displays “Not Ready,” you must use other methods to arm the system (refer to Section 
6.2.2 Force Arming on page 13 or Section 6.2.3 Zone Bypass on page 14). 

 

Table 7:  Maximum Security Arming 

 

 

 

 

Equipment  

Command Sequence 

What Happens 

What To Do 

Text Keypad LED 
Keypad 

[PIN][No Entry][On] 

•  The red Armed LED flashes. 

•  “Armed Instant” is displayed. * 

•  “Exit Now” is displayed during the exit-

delay period. * 

•  A single beep sounds. 

•  The red Armed LED lights steady when 

the exit-delay period ends. 

•  All zones are armed. 

•  Exit during the exit-delay 

period. 

•  Violating any zone after the 

exit-delay period ends 
triggers an instant alarm. 

RF3341 Keypad 

[PIN][#][5] 

•  The LED flashes indicating a signal was 

sent to your security system. 

•  All zones are armed. 

 •  Exit during the exit-delay 

period. 

•  Violating any zone after the 

exit-delay period ends 
triggers an instant alarm. 

RF3332/RF3332E, 
RF3334/RF3334E 

Not applicable 

* Text Keypad only