Bodyguard T360 Manuel D’Utilisation

• Error 1

• Error 2

• Error 11

• Error 12

• Error 21

• Error 22

• Error 23 

• Error 31

• Elevation 

Motor 

Error

• Acceleration is too quick in the acceleration or reached speed phase. 

• Possible causes: Motor drive defective or user pushing on the running belt for too long. 

• Running belt not following the speed required in the reached speed phase.

•   Possible causes:  Deck too sticky. Walk on deck for 15 minutes at 4 mph.

•   Motor drive board  can be defective.

• Check speed sensor or optical disk.  

• Acceleration is too fast during acceleration phase.
• Possible cause: Defective drive board.   

• Acceleration is too slow during acceleration phase.

• Possible causes: Deck too sticky. 

• Walk on deck for 15 minutes at 4 mph.

• Speed sensor problem.  

• In a deceleration phase, the speed slows too fast.

• Possible cause: Drive board defective.

•   In a deceleration mode, the speed slow down too slowly.

• Possible cause: Drive board defective, speed sensor problem.

• There is an abnormal acceleration during the deceleration phase.

• Motor drive board is defective.

• Acceleration is too quick under 2 mph.

• Possible causes: Motor drive defective or user pushing on the running belt for too long. 

•  Elevation motor values from potentiometer are out of range.

• Possible causes: Elevation motor is defective or uncalibrated. 

• Perform an elevation calibration in the diagnostics menu.

• Motor drive boa rd can be defective. 

• Elevation Motor not functionnal.

• Elevation Motor not connected.