Bodum DVR F1-ACE Manuel D’Utilisation

Page de 43
4
A/V & Data In/Out
VIDEO                            :   RCA/Cinch
Video Output(CVBS)
AUDIO R/L                     :   Cinch volume and Mute Control
(Resolution : 20bit DAC, max 2 Vrms)
RS232C                         :   Transfer rate 115,200 bps
9 pin D-sub Type
RF-Modulator
RF-Connector                :   75   , IEC 169-2, Male/Female
Frequency                      :   470MHz to 860MHz
Output Channel              :   CH21-69 or CH 28-69 or CH13-62
for the Remodulator
TV Standard                   :   PAL B/G/I selectable by Menu
Preset Channel              :   CH36(or TBD).
Software changeable by Menu
Test Pattern                   :   Vertical Black/White Bars
Power Supply
Input Voltage
:   190 to 250V AC, 50/60 Hz
Type                               :   SMPS
Power Consumption      :   Max. 30W
Standby Power               :      8W
Protection                       :   Seperate internal fuse.
The input shall have lightning Protection
Physical Specification
Size (W x H x D)            :   260 x 50 x 180 mm 
Weight (Net)                   :   Around 1.3 Kg
Operating Temp
:   0˚C to +45˚C
Storage Temp
:   -10˚C to +70˚C
Storage Humidity           :   5% ~ 95% RH(Non-Condensing)
You can use a special antenna switch
with DiSEqC commands. 
When changing channel from ASTRA  
to EUTELSAT for example, a DiSEqC
command is sent with the 22KHz tone
through the antenna cable. 
The antenna switch will change from 
using ASTRA to EUTELSAT. 
The concept of DiSEqC is a protective
trademark of EUTELSAT.
Data rate decides the picture quality of
digital TV programmes. 
Date rate of about 5-6 Mbit/s coincides
with the picture quality of a 
analog TV programme.
Specification
Please note : The specification of the STB may be changed without notice in advance.