Blaupunkt MIAMI CD74 Manuel D’Utilisation
16
Setting the sensitivity of station
seek tuning
seek tuning
You can choose whether to only tune
into stations with a strong reception or
to also tune into those with a weak re-
ception.
into stations with a strong reception or
to also tune into those with a weak re-
ception.
➮
press the TUNER button
<
in ra-
dio mode.
The radio functions menu appears in the
display.
display.
➮
Press the NEXT button
3
.
➮
Press the softkey
4
assigned to
the “SENS” display item.
The display shows the currently set sen-
sitivity level. “SENS 6” is the highest
sensitivity setting and means the tuner
can receive distant stations. “SENS 1”
is the lowest setting.
sitivity level. “SENS 6” is the highest
sensitivity setting and means the tuner
can receive distant stations. “SENS 1”
is the lowest setting.
➮
Move the joystick
7
up/right or
down/left to adjust the sensitivity.
➮
Press the joystick OK
7
or the
MENU button
8
to close the
menu.
The settings are saved.
Storing stations
Storing stations manually
➮
Select the required memory bank.
➮
Tune into the required station as
described in the section entitled
“Tuning into a station”.
described in the section entitled
“Tuning into a station”.
➮
Press one of the six softkeys for
longer than two seconds to store
the station to that softkey.
longer than two seconds to store
the station to that softkey.
Storing stations automatically
(Travelstore)
(Travelstore)
You can automatically store the six sta-
tions with the strongest reception in the
region. The stations are stored in the
FMT or AMT memory bank.
tions with the strongest reception in the
region. The stations are stored in the
FMT or AMT memory bank.
Note:
Any stations that were previously stored
in this memory bank are deleted in the
process.
Any stations that were previously stored
in this memory bank are deleted in the
process.
Starting the Travelstore function
➮
press the TUNER button
<
in ra-
dio mode.
The radio functions menu appears in the
display.
display.
➮
Press the softkey
4
assigned to
the “TS” display item.
The station storing procedure begins.
“T-STORE” appears in the display. Af-
ter the process is completed, the sta-
tion stored in location 1 of the FMT or
AMT memory bank will be played.
“T-STORE” appears in the display. Af-
ter the process is completed, the sta-
tion stored in location 1 of the FMT or
AMT memory bank will be played.
Listening to stored stations
➮
Select the memory bank or wave-
band.
band.
➮
Press the softkey
4
that is as-
signed to the name or frequency of
the station that you want to listen
to.
the station that you want to listen
to.
RADIO MODE