Black & Decker ICR517 Manuel
5
How to Use
This appliance is intended for household use only.
GETTING STARTED
• Remove any labels, stickers or tags attached to the body or soleplate of the iron.
• Please go to www.prodprotect.com/applica to register your warranty.
Note: Use ordinary tap water for ironing. Do not use water processed through a home
GETTING STARTED
• Remove any labels, stickers or tags attached to the body or soleplate of the iron.
• Please go to www.prodprotect.com/applica to register your warranty.
Note: Use ordinary tap water for ironing. Do not use water processed through a home
softening system.
Important: For optimum performance, let the iron stand for 90 seconds before
Important: For optimum performance, let the iron stand for 90 seconds before
beginning to iron.
Tip: If unsure of a garment's fiber, test a small area (on an inside seam or hem) before
Tip: If unsure of a garment's fiber, test a small area (on an inside seam or hem) before
ironing.
FILLING WATER TANK
. open the water-fill cover (A).
. Tilt the iron and using a clean measuring cup, pour water into
opening until the water reaches the MAX level mark on the
water tank (B). Do not overfill.
. Close the water-fill cover.
. Plug in the iron. A solid red light comes on and stays on until
the set temperature is reach. once the set temperature is
reached, the light turns solid green (C).
Note: If you need to add water while ironing, unplug the iron and
follow above steps.
SPECIAL FEATURES
Automatic Shutoff in 3 Positions
Automatic Shutoff in 3 Positions
• Your iron will automatically turn off after 0 seconds of
inactivity if left on its soleplate or on its side. If left vertically on
its heel rest, it will turn off after 8 minutes (D).
• The unit beeps five times and there is a flashing red light to
indicate the iron is in the automatic shutoff position.
• once you pick up the iron, the light will turn solid green again
once the set temperature is reached. If the iron is not fully
heated, a solid red light will appear; once the iron is ready, the
light will turn solid green.
Note: Wait for iron to reheat completely before resuming operation.
Anti-Drip System
The anti-drip system prevents water spotting at low temperatures.
Product may vary slightly from what is illustrated.
ENGLISH
1. Spray nozzle
2. Water-fill cover
3. Fabric select dial
4. Spray button
5. Steam button
6. Automatic shutoff light
7. Comfort Grip® handle
8. Cord reel button
9. Slip-resistant heel
10. Fabric guide
11. Water tank
12. AUTO CLEAN
2. Water-fill cover
3. Fabric select dial
4. Spray button
5. Steam button
6. Automatic shutoff light
7. Comfort Grip® handle
8. Cord reel button
9. Slip-resistant heel
10. Fabric guide
11. Water tank
12. AUTO CLEAN
®
button
13. Soleplate
14. Button groove
14. Button groove
Symbols
Surge of steam
Spray
Anti drip system
A
B
C
8 minutes
30 seconds
D
Fabric guide
1
Synthetic
2
Nylon • Silk
3
Polyester • Rayon
4
Cotton Blends
5
Wools
6
Cotton • Linen