Benq Projector MP735 Manuel D’Utilisation

Page de 71
Connection
25
English
Connecting Component Video source devices
Examine your Video source device to determine if it has a set of unused Component Video 
output sockets available: 
If so, you can continue with this procedure.
If not, you will need to reassess which method you can use to connect to the device.
To connect the projector to a Component Video source device:
1.
Take a Component Video to VGA (D-Sub) adaptor cable and connect the end with 3 
RCA type connectors to the Component Video output sockets of the Video source 
device. Match the color of the plugs to the color of the sockets; green to green, blue to 
blue, and red to red.
2.
Connect the other end of the Component Video to VGA (D-Sub) adaptor cable (with a 
D-Sub type connector) to the D-SUB/COMP.IN socket on the projector.
The final connection path should be like that shown in the following diagram:
If the selected video image is not displayed after the projector is turned on and the correct 
video source has been selected, check that the Video source device is turned on and 
operating correctly. Also check that the signal cables have been connected correctly.
If you have already made an HDMI Video connection between the projector and this 
Component Video source device using HDMI Video connections, you need not connect to 
this device using a Component Video connection as this makes an unnecessary second 
connection of poorer picture quality. See
 
for details.
Component Video to VGA 
(D-Sub) adaptor cable 
AV Device
Audio Cable