Benq PB7230 Manuel D’Utilisation

Maintenance

30

LED

Status & Description

Power Temp

Lamp

Power events

Power switch on

-

-

Power-up cooling. The projector needs 90 seconds to cool down 
as it was abnormally shutdown without the normal cooling 
dowm sequence.

-

-

Stand-by mode.

-

-

Lamp LED is blinking during powering up.

-

-

Power-down cooling for 90 seconds after power has been turned 
off.

-

-

Normal operation

Lamp events

-

-

It is warning you that lamp usage has exceeded 2000 hours. 
Replace the projection lamp with a new one immediately.

-

-

The lamp is not properly attached or the lamp is damaged. 
Please contact your dealer for assistance.

Thermal events

-

The projector will shutdown automatically. If you re-turn on 
the power, the projector will shutdown again. Please contact 
your dealer for assistance.

The projector will shutdown automatically. If you re-turn on 
the power, the projector will shutdown again. Please contact 
your dealer for assistance.

The projector will shutdown automatically. If you try to restart 
the projector, it will shutdown again. Please contact your dealer 
for assistance.