Benq Car Video System GW2250 Manuel Du Propriétaire

16 

Getting the most from your BenQ monitor  

How to install the monitor on a new computer

This instruction details the procedure for selecting and installing the BenQ LCD Monitor driver 
software on a new computer which has never had a monitor driver installed before. This 
instruction is only suitable for a computer which has never been used before, and for which the 
BenQ LCD Monitor is the first ever monitor to be connected to it.

1.  Follow the instructions in

. 

When Windows starts, it will automatically detect the new monitor and launch the Found New 
Hardware Wizard

. Follow the prompts until it displays the option to Install Hardware Device 

.

2.  Insert the BenQ LCD Monitor CD-ROM into a CD drive on the computer.
3.  Check 

 option, and click 

.

4.  Check the option for CD-ROM drives (uncheck all others) and click 

.

5.  Look to confirm that the wizard has selected the correct name of your monitor

 

and click 

.

6.  Click 

.

7.  Restart the computer.

If you are adding the BenQ LCD Monitor to an existing computer that has already had another monitor 
connected to it (and has monitor driver software installed), you should not be following these instructions. You 
should instead be following the instructions for How to upgrade the monitor on an existing computer.

To find the suitable driver files for the purchased model, refer to the following table.

Driver files

Suitable models

GW2250

GW2250 / GW2250M

GW2250H

GW2250HM

GW2450

GW2450 / GW2450M

GW2450H

GW2450HM

GW2750H

GW2750HM