Black Box Computer Accessories LPJ016A-F Manuel D’Utilisation
724-746-5500 | blackbox.com
724-746-5500 | blackbox.com
Page 29
Appendix A: Optional Ethernet Interface
Configuration Description
Table A-1. Controller Setup.
Item
Default Settings
Description
Administrator
Admin
The login administrator is a user-defined name that is used at login. Write
down your new Login name in a safe location for future use.
down your new Login name in a safe location for future use.
Password
(Blank)
The login password can be empty or 1–14 characters long. Please write down
your new password in a safe location for future use. The password is also
used while performing SNMP Firmware updates.
your new password in a safe location for future use. The password is also
used while performing SNMP Firmware updates.
IP Address
192.168.1.111
Four groups of numbers assigned by the network server (DHCP mode
Enabled) or user defined (DHCP mode disabled).
Enabled) or user defined (DHCP mode disabled).
Subnet Mask
255.255.255.0
Four groups of numbers assigned by the network server (DHCP mode
enabled) or user defined (DHCP mode disabled).
enabled) or user defined (DHCP mode disabled).
Gateway Address
192.168.0.1
Four groups of numbers assigned by the network server (DHCP mode
enabled) or user defined (DHCP mode disabled).
enabled) or user defined (DHCP mode disabled).
DNS Server
168.95.192.1
Four groups of numbers assigned to the network server.
DHCP Client
Enable
The default setting (Enable) sets the DHCP client in Dynamic mode. Dynamic
mode allows the network server to automatically assign the IP address, sub-
net mask, and gateway address.
mode allows the network server to automatically assign the IP address, sub-
net mask, and gateway address.
If the DHCP client is set to disable the DHCP client is set to Static mode. Static
mode allows the user to manually assign the IP address, subnet mask, and
gateway address.
mode allows the user to manually assign the IP address, subnet mask, and
gateway address.
NOTE: If the user manually assigns the IP address, the DHCP client must be
set to Disable.
System Tools
Firmware Backup: Click the Backup button and you will get a pop-up to save a BIN file of the current firmware and settings.
Save in a location that will be easy for you to remember and rename the file to a name you will remember.
Save in a location that will be easy for you to remember and rename the file to a name you will remember.
Figure A-7. Controller firmware backup screen.