Billion Electric Company 7300VGP Manuel D’Utilisation

 Username: Enter the username provided by your ISP. You can input up to 128 

alphanumeric characters (case sensitive). This is in the format of “username@ispname” 

instead of simply “username”. 

 Password: Enter the password provided by your ISP. You can input up to 128 

alphanumeric characters (case sensitive). 

 Service Name: This item is for identification purposes. If it is required, your ISP 

provides you the information. Maximum input is 20 alphanumeric characters. 

Your WAN IP address. Leave this at 0.0.0.0 to automatically obtain an IP 

address from your ISP. 

 Authentication Protocol: Default is Chap. Your ISP advises on using Chap or Pap. 

 Always on: If you want the router to establish a PPPoE session when starting up 

and to automatically re-establish the PPPoE session when disconnected by the ISP. 

 Connect to Demand: If you want to establish a PPPoE session only when there is 

a packet requesting access to the Internet (i.e. when a program on your computer 

attempts to access the Internet).

Auto-disconnect the broadband firewall gateway when there is no activity 

on the line for a predetermined period of time. 

 RIP: RIP v1, RIP v2, RIP v1+v2 and RIP v2 Multicast.   

 MTU:  Maximum Transmission Unit. The size of the largest datagram (excluding 

media-specific headers) an IP attempts to send through the interface. 

 

 

  RFC 1483 Bridged Connections