Benq w6000 Manuel D’Utilisation

Page de 56
18 
Connecting with video equipment  
Eng
lish
Connecting component-video devices
Be sure to match the corresponding colors between the cables and the terminals. The RCA type component 
video jacks are provided for connection to video output devices. You should also connect the separate 
audio cable to a suitable audio amplifier.
Connecting S-Video or video devices
You need only connect S-Video or composite Video cable from the same device, never both at the same 
time. You should also connect the separate audio cable to a suitable audio amplifier.
• 
If you have already made a Component Video connection between the projector and the video source 
device, you need not connect to this device again using an S-Video or composite Video connection as 
this makes an unnecessary second connection of poorer picture quality. You need only connect using 
a composite Video connection if both Component Video and S-Video are not supplied on the video 
source device (for example, with some analog video cameras).
• 
If the selected video image is not displayed after the projector is turned on and the correct video 
source has been selected, please check that the video source device is turned on and operating 
correctly. Also check that the signal cables have been connected correctly.
AV equipment: DVD player, 
digital tuner, etc.
From audio output 
terminals
To audio input 
terminals
Component video cable
From audio 
output terminals
To audio input 
terminals
S-Video cable
Video cable
or
AV equipment