Benq w6000 Manuel D’Utilisation
35
Using the projector
Eng
lish
lish
Displaying more than one image source
simultaneously
simultaneously
Your projector is capable of displaying pictures simultaneously from two input sources, which can be used
to enhance your presentation in an interesting way. Ensure the signals you want to display are correctly
connected to the projector.
to enhance your presentation in an interesting way. Ensure the signals you want to display are correctly
connected to the projector.
To display the PIP window:
• Using the remote control
Press PIP to display the PIP page and make adjustments by following the
steps starting from step 3 in the section
steps starting from step 3 in the section
below.
When the PIP window is on, to change the PIP window size, press SIZE
repeatedly until a desired size is selected.
repeatedly until a desired size is selected.
When the PIP window is on, to change the PIP window position, press
POSITION repeatedly until a desired position is selected.
POSITION repeatedly until a desired position is selected.
When the PIP window is on, to highlight one of the sources to make
adjustments, press ACTIVE repeatedly until the source is selected.
adjustments, press ACTIVE repeatedly until the source is selected.
• Using the OSD menu
1. Press MENU and then press / until the Display menu is
highlighted.
2. Press
to
highlight
PIP and press ENTER. The PIP page displays.
3. Highlight PIP and press / to select On.
The projector will select two currently active signals to display and the last
viewed picture will be displayed on the big screen as a main source.
The projector will select two currently active signals to display and the last
viewed picture will be displayed on the big screen as a main source.
The PIP function is effective at below source combinations.
4. To change the Main Source or Second Source, press to highlight
Main Source or Second Source and press ENTER. The source selection
bar displays.
bar displays.
5. Use / to highlight the source you want to display for the main
(bigger) or second (smaller) window, and press ENTER to save the
setting and go back to the PIP page.
setting and go back to the PIP page.
6. To make OSD settings to one of the two sources (main or second),
highlight Active Window and press
/ to select the source you want to make adjustments.
The settings made on the OSD menus will only take effect on the active window. The following
OSD menu function cannot work on the active windows for the PIP: Auto Source Search.
7. To change the position of the smaller picture, highlight Position and press
/ repeatedly until a
suitable position is selected.
8. To resize the small picture, highlight Size and press
/ to set the PIP size among Small or Large.
9. To save the settings and leave the OSD menu, press MENU once or EXIT repeatedly until the menu
disappears.
Source 2
Source 1
CVBS
S-Video
HDMI 1/2
V
V
Component 1/2
V
V
PC
V
V
PIP
PIP
Main Source
Second Source
Active Window
Position
Size
Second Source
Active Window
Position
Size
On
Main
Top-Right
Large
EXIT Back
ENTER
Aspect Ratio
Keystone
Position
Overscan Adjustment
Keystone
Position
Overscan Adjustment
PIP
PC & Component YPbPr Tuning
Display
EXIT Back
0
S-Video
Anamorphic