Benq W1500 Manuel Du Propriétaire

  47

  Important safety instructions

Personalizing the projector menu display

The On-Screen Display (OSD) menus can be set according to your preferences. The following settings do 
not affect the projection settings, operation, or performance. 

•  Menu Display Time in the System Setup > Menu Settings menu sets the length of time the 

OSD will remain active after your last key press. Use  /  to select a suitable time length.

•  Menu Position in the System Setup > Menu Settings menu sets the OSD position in five 

locations. Use  /  to select a preferred position.

•  Blank Reminder Message in the System Setup > Menu Settings menu displays a blank 

reminder message while the projected image on the screen is hidden. 

•  Language in the System Setup menu sets your familiar language for the On-Screen (OSD) Menus. 

See 

 for details. 

•  Splash Screen in the System Setup menu sets a preferred logo screen to be displayed during 

projector start-up.

Locking control keys

With the control keys on the remote control and projector locked, you can prevent your projector 
settings from being changed accidentally (by children, for example). When Key Lock is on, no control 
keys on the remote control and projector will operate except POWER and  .

To lock the keys:
1. Press MENU/EXIT and then press  /  until the Advanced Setup menu is highlighted.
2. Press  

to 

highlight 

Key Lock, and press  /  to select On. A warning message appears. Select Yes 

and press MODE/ENTER. The control keys lock.

To unlock the keys, press and hold   on the projector or remote control for 3 seconds.