Benq W10000 Manuel D’Utilisation

Additional information

English

Indicators

There are three indicators which show the status of the projector. Check the following for information about
the indicator lights. If there is anything wrong, turn the projector off and contact your dealer.

When the projector is in a normal state, ...

When the projector is in an abnormal state, ...

POWER

TEMP

LAMP STATE

REMARK

Orange

Off

Standby mode.

Flashing
orange

The projector is powering up.

Cannot turn the projector off.

Green

The projector is under normal
operation.

Flashing
green

(1) The projector needs 110

seconds to cool down as it
was abnormally shut down
without the normal cooling
down process. Or

(2) The projector needs to cool

for 110 seconds after the
power is turned off.

Cannot turn the projector on.

POWER

TEMP

LAMP

STATE

REMARK

Orange

Off

Red

(1) The lamp has exceeded its

usage life. Or

(2) The lamp is not properly

attached or is damaged.

Solution:

• Install a new lamp.
• Please contact your dealer for

assistance.

Orange

Red

Off

The dust filter is seriously clogged
with dust. The projector is going to
shut down.

Solution:

• Install a new filter.

Orange

Red

Off

The internal temperature is too
high.

• The intake ventilation or the

exhaust ventilation is blocked.

• The projector may be in a poorly

ventilated location.

• The ambient temperature may

be too high.

Solution:

• Make sure that the ventilation

holes are not blocked.

• Relocate the projector.
• Stop using the projector until

the ambient temperature falls
within the specified range. The
maximum operating
temperature is specified as 40°C
/ 104°F.

Orange

Flashing
red

The fans are not working.

Solution:

• Check if the power supply is

stable.

• Check if there is object stuck in

the fans.

• Contact your dealer.