Benq SH960 Manuel D’Utilisation

  23

  Using the projector

Eng
lish

Utilizing the password function

For security purposes and to help prevent unauthorized use, the projector includes an option for setting up 
password security. The password can be set through the On-Screen Display (OSD) menu. Once the 
password is set and this function is selected, the projector is password-protected. Users who do not know 
the correct password can not use the projector.

Setting a password

1. Press MENU/EXIT and then press  /  until the Advanced Setup 

menu is highlighted.

2. Press   to highlight Password and press ENTER. The Password page is 

displayed.

3. Highlight Password and press  /  to select On. The Input Password 

page is displayed.

4. As the picture indicates, the four arrow keys ( , 

, 

,  ) 

respectively represent 4 digits (1, 2, 3, 4). According to the password 
you desire to set, press the arrow keys on the remote control or 
projector to enter six digits for the password.
If the function is used for the first time, enter the default password (1, 
1, 1, 1, 1, 1) of the projector by pressing the arrow key   six times.
Once the password is set, the OSD menu returns to the Password page.

5. To leave the OSD menu, press MENU/EXIT.

If you forget the password

If the password function is activated, you will be asked to enter the six-digit password every time you turn 
on the projector. If you enter the wrong password, the password error message is displayed lasting for three 
seconds, and the Input Password page follows. You can retry by entering another six-digit password, or if 
you did not record the password in this manual, and you absolutely do not remember it, you can use the 
password recall procedure. See 

 for details.

If you enter an incorrect password 5 times in succession, the projector will automatically shut down in a 
short time.