Benq SH960 Manuel D’Utilisation
54
Additional information
Eng
lish
lish
1.
Turn the power off and disconnect the
projector from the power outlet. Turn off all
connected equipment and disconnect all other
cables. See
projector from the power outlet. Turn off all
connected equipment and disconnect all other
cables. See
for details.
2.
Loosen the screw on the lamp cover.
3.
Remove the lamp cover.
4.
Identify the lamp you want to replace by looking
at the top of the lamp.
at the top of the lamp.
5.
Loosen the screw that hold the lamp to the
projector. Disconnect the lamp connector from
the projector.
projector. Disconnect the lamp connector from
the projector.
6.
Lift the handle so that it is perpendicular to the
lamp. Use the handle to slowly pull the lamp
out of the projector.
lamp. Use the handle to slowly pull the lamp
out of the projector.
Notes
•
Pulling it too quickly may cause the lamp to
break and scatter broken glass in the projector.
To reduce the risk of injuries to fingers and
damage to internal components, use caution
when removing lamp glass that has shattered.
break and scatter broken glass in the projector.
To reduce the risk of injuries to fingers and
damage to internal components, use caution
when removing lamp glass that has shattered.
•
Do not place the lamp in locations where water
might splash on it, children can reach it, near or
above heat sources, or near flammable
materials.
might splash on it, children can reach it, near or
above heat sources, or near flammable
materials.
•
Do not insert your hand into the projector when
the lamp is removed. If you touch the optical
components inside, it could cause blurred
images.
the lamp is removed. If you touch the optical
components inside, it could cause blurred
images.
1
2