Benq Projector W1060 Manuel D’Utilisation
Operation
41
Eng
lish
lish
Remote Receiver
The Infrared Remote Receiver (Front and Top)
allows the projector to accept signals from the
remote control. For best results, be sure to aim
the control toward the sensor without any
obstructions between the two, and at a distance
no greater than 7 meters.
allows the projector to accept signals from the
remote control. For best results, be sure to aim
the control toward the sensor without any
obstructions between the two, and at a distance
no greater than 7 meters.
You can set the remote receiver in the
SYSTEM
SETUP: Basic > Remote Receiver
menu.
Freezing the image
Press FREEZE on the remote control to freeze the image. The word
'FREEZE' will display in the upper left corner of the screen.
'FREEZE' will display in the upper left corner of the screen.
To release
the function, press any key on the projector or remote control.
Even if an image is frozen on the screen, the pictures are running on
the video or other device. If the connected devices have active audio
output, you will still hear the audio even though the image is frozen on
screen.
the video or other device. If the connected devices have active audio
output, you will still hear the audio even though the image is frozen on
screen.
Operating in a high altitude environment
We recommend you use the High Altitude Mode when your environment is between
1500 m –3000 m above sea level, and temperature is between 5°C–23°C.
1500 m –3000 m above sea level, and temperature is between 5°C–23°C.
Do not use the High Altitude Mode if your altitude is between 0 m and 1500 m and temperature
is between 5°C and 28°C. The projector will be over cooled, if you turn the mode on under
such a condition.
is between 5°C and 28°C. The projector will be over cooled, if you turn the mode on under
such a condition.
To activate the High Altitude Mode:
1.
1.
Press MENU/EXIT and then press
/
until the SYSTEM SETUP: Advanced menu is
highlighted.
highlighted.
2.
Press
to
highlight
High Altitude Mode
and press
/
to select On. A
confirmation message displays.
3.
Highlight Yes and press MODE/ENTER.
Operation under "High Altitude Mode" may cause
a higher decibel operating noise level because of increased fan speed necessary to improve
overall system cooling and performance.
a higher decibel operating noise level because of increased fan speed necessary to improve
overall system cooling and performance.
If you use this projector under other extreme conditions excluding the above, it may display
auto shut-down symptoms, which is designed to protect your projector from over-heating.
In cases like this, you should switch to High Altitude mode to solve these symptoms.
However, this is not to state that this projector can operate under any and all harsh or
extreme conditions.
auto shut-down symptoms, which is designed to protect your projector from over-heating.
In cases like this, you should switch to High Altitude mode to solve these symptoms.
However, this is not to state that this projector can operate under any and all harsh or
extreme conditions.
Yes
No
Notice
We recommend you use the High Altitude
mode by selecting it whenever your
environment is higher than 1500m.
Do you want to turn High Altitude
Mode ON?
Mode ON?