Benq Projector MW516 Manuel D’Utilisation

Operation 37

In the situation where you are projecting onto a colored surface such as a painted wall 

which may not be white, the Wall Color feature can help correct the projected picture’s 

color to prevent possible color difference between the source and projected pictures.

To use this function, go to the DISPLAY > Wall Color menu and press 

/

 to select 

a color which is the closest to the color of the projection surface. There are several 

precalibrated colors to choose from: Light Yellow, Pink, Light Green, Blue, and 

Blackboard.

According to the detected signal type, there are some user-definable functions available 

when User 1 or User 2 mode is selected. Based on your needs, you can make 
adjustments tothese functions by highlighting them and pressing 

/ 

on the projector 

or remote control

The higher the value, the brighter the image. And the 

lower the setting, the darker the image. Adjust this 

control so the black areas of the image appear just as 

black and that detail in the dark areas is visible.

The higher the value, the greater the contrast. Use this 

to set the peak white level after you have previously 

adjusted the Brightness setting to suit your selected 

input and viewing environment.

Lower setting produces less saturated colors. If the setting is too high, colors on the image 

will be overpowering, which makes the image unrealistic.

The higher the value, the more reddish the picture becomes. The lower the value, the 

more greenish the picture becomes.

The higher the value, the sharper the picture becomes. The lower the value, the softer the 

picture becomes.

This feature utilizes a new color-processing algorithm and system level enhancements to 

enable higher brightness while providing truer, more vibrant colors in picture. It enables a 

greater than 50% brightness increase in mid-tone images, which are common in video and 

natural scenes, so the projector reproduces images in realistic and true colors. If you 

prefer images with that quality, select On. If you don’t need it, select Off.

On is the default and recommended selection for this projector. When Off is selected, the 

Color Temperature function is not available.

∫е‰

∫″‰

∫з‰

0

+30

-30