Benq Projector MP670 Manuel D’Utilisation

Positioning your projector

14

Your room layout or personal preference will dictate which installation location you select. 
Take into consideration the size and position of your screen, the location of a suitable power 
outlet, as well as the location and distance between the projector and the rest of your 
equipment.

Your projector is designed to be installed in one of four possible installation locations: 

Select this location with the projector placed on a table in 
front of the screen. This is the most common way to 
position the projector for quick setup and portability.

Select this location with the projector suspended upside-
down from the ceiling in front of the screen.

Purchase the BenQ Projector Ceiling Mounting Kit from 
your dealer to mount your projector on the ceiling.

Set Front Ceiling in the SYSTEM SETUP: Basic > 
Projector Position menu after you turn the projector on.

Select this location with the projector placed on a table 
behind the screen.

Note that a special rear projection screen is required.

Set Rear Table in the SYSTEM SETUP: Basic > 
Projector Position menu after you turn the projector on.

Select this location with the projector suspended upside-
down from the ceiling behind the screen.

Note that a special rear projection screen and the BenQ 
Projector Ceiling Mounting Kit are required for this 
installation location.

Set Rear Ceiling in the SYSTEM SETUP: Basic > 
Projector Position menu after you turn the projector on.

1. Press 

MENU/EXIT on the projector or remote control 

and then press

 

/

 

until the SYSTEM SETUP: 

Basic menu is highlighted.

2. Press

 

/

 

to highlight Projector Position and press

 

/

 

until the correct position is selected.