Benq Projector MP670 Manuel D’Utilisation

Operation

46

1.

Repeat steps 1-4 above.

2.

Projector will restore the latest IP configuration into Lan Control Settings. (*1)

3.

Press  

to 

highlight 

DHCP and press 

/

 to select Off.

4.

Contact your ITS administrator for information on the Projector IP Address, Subnet 
Mask, Default Gateway, and DNS Server settings.

5.

Press 

 to select the item you want to modify and press MODE/ENTER.

6.

Press 

/

 to move the cursor and the press 

/

 to enter the value.

7.

To save the settings, press MODE/ENTER. If you do not want to save the settings, 
press MENU/EXIT.

8.

Press  

to 

highlight 

Apply and press MODE/ENTER.

Once you have the correct IP address for the projector and the projector is on or in standby 
mode, you can use any computer that is on the same local area network to control the 
projector.

1.

Enter the address of the projector in the address bar of your browser and click GO.

2.

The remote network operation page opens. This page allows you to operate the 
projector as if you were using the remote control or control panel on the projector.

MENU Back