Benq Projector MP777 Manuel D’Utilisation

Operation

This function is only available when User 1 or User 2 mode is selected up in the Picture Mode
sub-menu item.

Press //// to select a picture mode that is closest to your need.

Press

to select a menu item to be changed and adjust the value with

////

. See

"Fine-tuning the image quality in user modes"

below for details.

When all settings have been done, highlight Save Settings

Save Settings

Save Settings and press MODE/ENTER

MODE/ENTER

MODE/ENTER to

store the settings.

The confirmation message “Setting Saved

Setting Saved

Setting Saved” displays.

Fine-tuning the image quality in user modes

According to the detected signal type, there are some user-definable functions available
when User 1

User 1

User 1 or User 2

User 2

User 2 is selected. Based on your needs, you can make adjustments to these

functions by highlighting them and pressing

on the projector or remote control.

Adjusting

Adjusting Brightness

Brightness

The higher the value, the brighter the image. And the
lower the setting, the darker the image. Adjust this
control so the black areas of the image appear just as
black and that detail in the dark areas is visible.

Adjusting

Adjusting Contrast

Contrast

The higher the value, the greater the contrast. Use this
to set the peak white level after you have previously
adjusted the Brightness setting to suit your selected
input and viewing environment.

Adjusting

Adjusting Color

Color

Lower setting produces less saturated colors. If the setting is too high, colors on the image
will be overpowering, which makes the image unrealistic.

Adjusting

Adjusting Tint

Tint

The higher the value, the more reddish the picture becomes. The lower the value, the more
greenish the picture becomes.

Adjusting

Adjusting Sharpness

Sharpness

The higher the value, the sharper the picture becomes. The lower the value, the softer the
picture becomes.

-30