Benq Projector MP777 Manuel D’Utilisation
Operation
39
Adjusting the sound
Adjusting the sound
Adjusting the sound
Adjusting the sound
The sound adjustments made as below will have an effect on the projector speakers. Be sure
you have made a correct connection to the projector audio input. See
you have made a correct connection to the projector audio input. See
for how the audio input is connected.
Muting the sound
Muting the sound
Muting the sound
Muting the sound
To temporarily turn off the sound:
1.
1.
Press MENU/EXIT
MENU/EXIT
MENU/EXIT
MENU/EXIT and then press /
until the SYSTEM SETUP: Advanced
SYSTEM SETUP: Advanced
SYSTEM SETUP: Advanced
SYSTEM SETUP: Advanced menu
is highlighted.
2.
Press
to
highlight
Audio
Settings
Audio Settings
Audio Settings
Audio Settings and press MODE/ENTER
MODE/ENTER
MODE/ENTER
MODE/ENTER. The Audio Settings
Audio Settings
Audio Settings
Audio Settings
page displays.
3.
Highlight Mute
Mute
Mute
Mute and press /
to select On
On
On
On.
Adjusting the sound level
Adjusting the sound level
Adjusting the sound level
Adjusting the sound level
To adjust the sound level, press Volume +/-
Volume +/-
Volume +/-
Volume +/- on the remote control, or:
1.
Repeat steps 1-2 above.
2.
Press
to
highlight
Volume
Volume
Volume
Volume and press /
to select a desired
sound level.
Turning off the
Turning off the
Turning off the
Turning off the Power on/off ring tone
Power on/off ring tone
Power on/off ring tone
Power on/off ring tone
To turn off the ring tone:
1.
1.
Repeat steps 1-2 above.
2.
Press to highlight Power on/off ring tone
Power on/off ring tone
Power on/off ring tone
Power on/off ring tone and press /
to
select Off
Off
Off
Off.
The only way to change Power on/off ring tone is setting On or Off here.
Setting the sound mute or changing the sound level will not affect the
Power on/off ring tone.
Setting the sound mute or changing the sound level will not affect the
Power on/off ring tone.
Personalizing the projector menu display
Personalizing the projector menu display
Personalizing the projector menu display
Personalizing the projector menu display
The On-Screen Display (OSD) menus can be set according to your preferences. The
following settings do not affect the projection settings, operation, or performance.
following settings do not affect the projection settings, operation, or performance.
• Menu Display Time
Menu Display Time
Menu Display Time
Menu Display Time in the SYSTEM SETUP: Basic
SYSTEM SETUP: Basic
SYSTEM SETUP: Basic
SYSTEM SETUP: Basic > Menu Settings
Menu Settings
Menu Settings
Menu Settings menu sets the length
of time the OSD will remain active after your last key press. The time length ranges from
5 to 30 seconds in 5-second increments. Use
5 to 30 seconds in 5-second increments. Use
/
to select a suitable time.
• Menu
Position
Menu Position
Menu Position
Menu Position in the SYSTEM SETUP: Basic
SYSTEM SETUP: Basic
SYSTEM SETUP: Basic
SYSTEM SETUP: Basic > Menu Settings
Menu Settings
Menu Settings
Menu Settings menu sets the OSD
position in five locations. Use
/
to select a preferred position.
• Language
Language
Language
Language in the SYSTEM SETUP: Basic
SYSTEM SETUP: Basic
SYSTEM SETUP: Basic
SYSTEM SETUP: Basic menu sets your familiar language for the On-
Screen (OSD) Menus. Use
/
to select your language.
• Splash
Screen
Splash Screen
Splash Screen
Splash Screen in the SYSTEM SETUP: Basic
SYSTEM SETUP: Basic
SYSTEM SETUP: Basic
SYSTEM SETUP: Basic menu sets a preferred logo screen to be
displayed during projector start-up. Use
/
to select a screen.