Benq Projector model gp1 Manuel D’Utilisation

Operation

20

Operation

Starting up the projector

1.

Plug the AC adapter into the DC IN socket of the projector.

2.

Plug one end of the power cord into the AC adapter.

3.

Plug the other end of the power cord into a wall socket. Turn on the wall socket switch 
(where fitted). Check that the Power LED indicator on the projector flashes blue 
slowly and Ring LED indicator lights blue after power has been applied.

4.

Press 

Power on the projector or remote 

control to start the projector. The Power, Ring 
and Key LED indicators light blue when the 
projector is on.
The start up procedure takes several seconds. 
In the later stage of start up, a startup logo is 
projected.
(If necessary) Rotate the focus ring to adjust 
the image clearness.

5.

If you are prompted for a password, press the arrow keys to enter a six digit password. 
See 

 for details.

6.

Switch all of the connected equipment on.

7.

The projector will start to search for input signals. The current input signal being 
scanned displays in the upper left corner of the screen. If the projector doesn't detect a 
valid signal, the message 'No Signal' will continue displaying until an input signal is 
found.
You can also press SOURCE on the projector or remote control to select your desired 
input signal. See 

 for details.