Benq Projector model gp1 Manuel D’Utilisation
Operation
27
2.
Real:
The image is projected as its original
resolution, and resized to fit within the display area.
For input signals with lower resolutions, the
projected image will display smaller than if resized
to full screen. You could adjust the zoom setting or
move the projector towards the screen to increase
the image size if necessary. You may also need to
refocus the projector after making these
adjustments.
For input signals with lower resolutions, the
projected image will display smaller than if resized
to full screen. You could adjust the zoom setting or
move the projector towards the screen to increase
the image size if necessary. You may also need to
refocus the projector after making these
adjustments.
3.
Full Screen: Any types of resolution always fill the
whole screen.
whole screen.
4.
4:3: Scales an image so that it is displayed in the
center of the screen with a 4:3 aspect ratio. This is
most suitable for 4:3 images like computer
monitors, standard definition TV and 4:3 aspect
DVD movies, as it displays them without aspect
alteration.
center of the screen with a 4:3 aspect ratio. This is
most suitable for 4:3 images like computer
monitors, standard definition TV and 4:3 aspect
DVD movies, as it displays them without aspect
alteration.
5.
16:9: Scales an image so that it is displayed in the
center of the screen with a 16:9 aspect ratio. This is
most suitable for images which are already in a 16:9
aspect, like high definition TV, as it displays them
without aspect alteration.
center of the screen with a 16:9 aspect ratio. This is
most suitable for images which are already in a 16:9
aspect, like high definition TV, as it displays them
without aspect alteration.
Optimizing the image
Selecting a picture mode
The projector is preset with several predefined
picture modes so that you can choose one to suit
your operating environment and input signal
picture type.
picture modes so that you can choose one to suit
your operating environment and input signal
picture type.
To select an operation mode that suits your need,
you can follow one of the following steps.
you can follow one of the following steps.
•
Press MODE/ENTER on the remote control or
projector repeatedly until your desired mode is
selected.
projector repeatedly until your desired mode is
selected.
•
Go to the PICTURE > Picture Mode menu and
press
press
/
to select a desired mode.
Picture modes for different types of signals
The picture modes available for different types of signals are listed below.
1.
Brightness mode (Default): Maximizes the brightness of the projected image. This
mode is suitable for environments where extra-high brightness is required, such as
using the projector in well lit rooms.
mode is suitable for environments where extra-high brightness is required, such as
using the projector in well lit rooms.
2.
PC mode: Is designed for presentations. The brightness is emphasized in this mode to
match PC and notebook coloring.
match PC and notebook coloring.
4:3 picture
16:9 picture
4:3 picture
16:9 picture