Benq PB9200 Manuel D’Utilisation
Setting Up
6
Adjusting The Projector's Elevator
WARNING
•
Do not touch about the lens and ventilation openings during use or immediately after
use to prevent a burn.
use to prevent a burn.
CAUTION
•
To prevent damaging the projector and injuring yourself, always hold the projector
whenever using the elevator buttons to adjust the elevator feet.
whenever using the elevator buttons to adjust the elevator feet.
You can use the elevator feet to make adjustments if the surface on which you need to set the
projector is uneven or if you otherwise need to adjust the angle of projection. The adjust-
ment range of the elevator feet is 0 to 9 degrees.
projector is uneven or if you otherwise need to adjust the angle of projection. The adjust-
ment range of the elevator feet is 0 to 9 degrees.
1.
Press and hold in the elevator
buttons.
buttons.
2.
Raise or lower the projector
to the desired height and
then release the elevator but-
tons. When you release the
elevator buttons, the eleva-
tor
to the desired height and
then release the elevator but-
tons. When you release the
elevator buttons, the eleva-
tor
feet will lock into posi-
tion.
3.
As necessary, you can also
finely adjust the height of the
projector by twisting the ele-
vator feet by hand.
finely adjust the height of the
projector by twisting the ele-
vator feet by hand.
Using The Lens Shift Buttons
The lens of this projector can be shifted verti-
cally. When you want to finely adjust the pic-
ture position, use the LENS SHIFT buttons of
the projector.
cally. When you want to finely adjust the pic-
ture position, use the LENS SHIFT buttons of
the projector.
IN
TER
INPUT
M1-D
RGB
BNG
S-V
ID
EO
ST
AN
DBY/O
N
TEM
P
VIDE
O
CO
MPO
NENT
LAMP
KE
YS
TONE
SEAR
CH
RESET
MENU
FO
CU
S
LEN
S S
HIF
T
ZOO
M
Elevator feet
Elevator buttons
LENS SHIFT
STANDBY/ON
VIDEO
LASER INDICATOR
RGB
BLANK
ASPECT
LASER
LENS SHIFT
+
–
–
–
+
+
FOCUS
ZOOM
Projector
Remote control
LENS SHIFT
buttons
PB9200-e.book Page 6 Thursday, May 27, 2004 2:15 PM