Benq MW721 Manuel D’Utilisation

Operation

46

 

Network
Selecting On enables the function. The projector is able to provide the 

network function when it is in standby mode.

Microphone
Selecting On enables the function. The projector can output the 

microphone signal when it is in standby mode and all the necessary 

equipment is correctly connected. See 

 for details.

Monitor Out
Selecting On enables the function. The projector can output a VGA 

signal when it is in standby mode and the COMPUTER 1 jack is 

correctly connected to devices. See 

 for how 

to make the connection.

Audio Pass Through
The projector can play sound when it is in standby mode and the 
corresponding jacks are correctly connected to devices. Press  /  to 

choose the source that you wish to use. See 

 

for how to make the connection.

Enabling this function slightly increases the standby power consumption.

Wired LAN
Projection Log In Code
See 

BenQ Network Projector Operation Guide

 for details.

AMX Device Discovery
When AMX Device Discovery is On, the projector can be detected 

by AMX controller.

MAC Address
Displays the mac address for this projector.

Returns all settings to the factory preset values.

The following settings will still remain: Position, Phase, H. Size, Projector 

Installation, Color Space Conversion, High Altitude Mode, Security 

Settings, Baud Rate and Network Settings.