Benq MP620C Manuel D’Utilisation
Connection
17
Connection
When connecting a signal source to the projector, be sure to:
1.
Turn all equipment off before making any connections.
2.
Use the correct signal cables for each source.
3.
Ensure the cables are firmly inserted.
In the connections shown below, some cables may not be included with the
projector (see
projector (see
). They are commercially available
from electronics stores.
Wireless connection (optional)
The Wireless module allows for simultaneous wireless connectivity to multiple computers
which are wireless enabled. This saves you from having to swap data cables between the
projector and different computers during a presentation. Wireless connectivity is most
suitable for situations where multiple presenters with separate notebooks are required to
seamlessly present individual presentations, like in meetings, conferences, lectures and,
classrooms.
which are wireless enabled. This saves you from having to swap data cables between the
projector and different computers during a presentation. Wireless connectivity is most
suitable for situations where multiple presenters with separate notebooks are required to
seamlessly present individual presentations, like in meetings, conferences, lectures and,
classrooms.
Even though the Wireless module is not attached to the projector, everytime the projector is
turned on, the status of wireless connection will display on the screen while the projector is
searching for input signals during the start up procedure.
turned on, the status of wireless connection will display on the screen while the projector is
searching for input signals during the start up procedure.
The Wireless module connects and atta6.2( th3.1(om)-5. 9te ).9(f1n.9(t)-5mo)-1ss comomt th3.1(om)-5.iple cect th3.1rss coduri14t tngt t-5mo cleI-.1(gI6.6( )]TJ0 -1.0638- Tc0.0008 Tc0 Tso4(en)-8.(t)-kject)1ea.