Benq MP620C Manuel D’Utilisation

Operation

41

Pro-Picture menu

Corrects any keystoning of the image. Refer to 

 for more information.

Automatically resizes the input signal pixel resolution to the native resolution 
of the projector.
On: The pixel resolution of the input signal is converted to the native 

resolution of the projector (1024 x 768). For input signals with lower 

resolutions, gaps in the pixels are automatically interpolated into the image 

before being projected. This may distort the image clarity.

Off: If larger than the native resolution of the projector, the image is resized to 

fit within the display area. For input signals with lower resolutions, the 

projected image will display smaller than if resized to full screen. You could 

adjust the zoom setting or move the projector towards the screen to increase 

the image size if necessary. You may also need to refocus the projector after 

making these adjustments. 

There are three options to set the image's aspect ratio depending on your input 

signal source.

See

  

for details.

Adjusts the horizontal position 
of the projected image. 

Adjusts the vertical position of 
the projected image. 

Adjusts the video input clock to synchronise with 
the video signal. This helps reduce image distortion 
produced by some PC video timings.

Adjusts the horizontal width of the image.

-30

+30

-30

+30