Benq LW61ST Manuel Du Propriétaire

Operation

36

4.

If the action is successful, you see the message 'Captured Succeeded' on the 
screen. The captured picture is saved as MyScreen.

5.

To view the captured picture displayed as the startup screen, set MyScreen in the 
SYSTEM SETUP: Basic > Splash Screen menu and restart the projector.

•  Using the OSD menu
1.

Press MENU/EXIT and then press  /  until the SYSTEM SETUP: Basic menu 
is highlighted.

2.

Press  

to 

highlight 

MyScreen and press MODE/ENTER.

3.

Repeat steps 2-5 in the 

 section to capture and view the 

captured picture.

In the unlikely event that the capturing action fails, change your target picture.

Adjusting the sound

The sound adjustments made as below will have an effect on the projector speakers. Be 

sure you have made a correct connection to the projector audio input. See 

 for how the audio input is connected.

Muting the sound

To temporarily turn off the sound:
1.

Press MENU/EXIT and then press  /  until the SYSTEM SETUP: Advanced 
menu is highlighted.

2.

Press  

to 

highlight 

Audio Settings and press MODE/ENTER. The Audio 

Settings page is displayed.

3.

Highlight Mute and press  /  to select On.

If available, you can also press MUTE on the remote control to toggle projector audio between on and off.

Adjusting the sound level

To adjust the sound level, press VOLUME+/VOLUME- on the remote control, or:
1.

Repeat steps 1-2 above.

2.

Press  

to 

highlight 

Volume and press  /  to select a desired sound level.

Adjusting the microphone volume

To adjust the microphone sound level, press MIC/VOL keys (+/-) on the remote control, 

or:
1.

Repeat steps 1-2 above.

2.

Press  

to 

highlight 

Microphone Volume and press  /  to select a desired 

sound level.

Turning off the Power On/Off Ring Tone

To turn off the ring tone:
1.

Repeat steps 1-2 above.

2.

Press  

to 

highlight 

Power On/Off Ring Tone and press  /  to select Off.

The only way to change Power On/Off Ring Tone is setting On or Off here. Setting the sound mute or 

changing the sound level will not affect the Power On/Off Ring Tone.