Manualsbrain.com
  1. Manuels
  2. Marques
  3. Benq
  4. MP611c
  5. Manuel D’Utilisation

Benq MP611c Manuel D’Utilisation

Télécharger
Page de 60
Connection
17
Connection
When connecting a signal source to the projector, be sure to:
1.
Turn all equipment off before making any connections.
2.
Use the correct signal cables for each source.
3.
Ensure the cables are firmly inserted. 
In the connections shown below, some cables may not be included with the 
projector (see 
). They are commercially available 
from electronics stores.
Connecting a computer or monitor
Connecting a computer
The projector provides a VGA input socket that allows you to connect it to a laptop or 
desktop computer. 
To connect the projector to a laptop or desktop computer:
1.
Take the supplied VGA cable and connect one end to the D-Sub output socket of the 
computer.
2.
Connect the other end of the VGA cable to the D-SUB/COMP IN signal input socket 
on the projector.
3.
If you wish to make use of the projector (mixed mono) speaker, take a suitable audio 
cable and connect one end of the cable to the audio output socket of the computer, 
and the other end to the Audio socket of the projector.
The final connection path should be like that shown in the following diagram:
Many laptops do not turn on their external video ports when connected to a projector. Usually 
a key combo like FN + F3 or CRT/LCD key turns the external display on/off. Locate a function 
key labeled CRT/LCD or a function key with a monitor symbol on the laptop. Press FN and the 
labeled function key simultaneously. Refer to your laptop’s documentation to find your 
laptop’s key combination.
Laptop or desktop computer
Audio cable
VGA cable