Benq MP730 Manuel D’Utilisation
Connection
26
Connecting a composite Video source device
Examine your Video source device to determine if it has a set of unused composite Video
output sockets available:
output sockets available:
•
If so, you can continue with this procedure.
•
If not, you will need to reassess which method you can use to connect to the device.
To connect the projector to a composite Video source device:
1.
Take a Video cable and connect one end to the composite Video output socket of the
Video source device.
Video source device.
2.
Connect the other end of the Video cable to the VIDEO socket on the projector.
The final connection path should be like that shown in the following diagram:
A/V device
Audio
cable
cable
Video
cable
cable
•
The projector is only
capable of playing mixed
mono audio, even if a
stereo audio input is
connected. See
capable of playing mixed
mono audio, even if a
stereo audio input is
connected. See
for details.
•
If the selected video image
is not displayed after the
projector is turned on and
the correct video source
has been selected, check
that the Video source
device is turned on and
operating correctly. Also
check that the signal
cables have been
connected correctly.
is not displayed after the
projector is turned on and
the correct video source
has been selected, check
that the Video source
device is turned on and
operating correctly. Also
check that the signal
cables have been
connected correctly.
•
You need only connect to
this device using a
composite Video
connection if Component
Video and S-Video inputs
are unavailable for use.
See
this device using a
composite Video
connection if Component
Video and S-Video inputs
are unavailable for use.
See
for details.