Benq MP510 Manuel D’Utilisation

Operation

38

Advanced menu

The projector can be installed on a ceiling or behind a screen, or with one 
or more mirrors. Contact your dealer for the ceiling mount bracket 
(optional accessory) if you need to install the projector on your ceiling. 
See 

Choosing a location" on page 13 for details.

Sets whether the projector searches automatically for input signals. If the 
source scan is On, the projector will scan for input signals until it acquires 
a signal. If the function is not activated, the projector selects the last used 
input signal. The default value is 'RGB'.

Sets the language for the OSD menus.

There are 17 languages for your choice: English (default), French, 
German, Italian, Spanish, Russian, Traditional Chinese, Simplified 
Chinese, Japanese, Korean, Swedish, Dutch, Turkish, Czech, Portuguese, 
Thai, and Polish.

Select which logo screen will display during projector start-up. Three 
modes are available: BenQ logo, Black screen, and Blue screen.

A mode for operation in areas like high altitude or high temperature.

See 

 for details.

Sets the projector to turn off automatically if no input signal is detected 
after a set period of time.

See 

 for details.

Use this mode to reduce system noise and reduce power consumption by 
20%. If this mode is activated, the light output will be reduced and result 
in darker projected pictures.

Reminds the presenter to finish the presentation within a certain time 
frame. See 

 for details.

Timer Activate (Off): Turns the presentation timer on or off.

Timer Period (60 min.): Sets a preferred length of time for presentation.

Display Timer (Always): Sets whether to display the timer on screen.

Timer Position (

): Sets the position where the timer displays on screen.

Timer Counting Direction (Count Up): Sets the timer counting direction.