Benq Dlp Projector MX722 Manuel D’Utilisation

Introduction

7

Introduction

Projector features

Less than 0.5W power consumption under standby mode.

Filter free design to lower maintenance and operating costs.

Integrated RJ45 connector for wired network control allowing management of 
projector status from a computer using a web browser.

The projector supports Crestron eControl and RoomView, PJ Link and AMX allowing 
you to control and manage equipment from a remote computer via LAN connection.

Pressing AUTO on the keypad or remote control to show the best picture quality 
immediately.

Provides truer, more vibrant colors in picture.

Built-in 10W speaker(s) providing mixed mono audio when an audio input is connected

Quick Cooling function speeds up the cooling process when turning off the 
projector. Auto Power Off function allows the projector to turn off automatically if 
no input signal is detected after a set period of time. Signal Power On function turns 
on your projector automatically once detecting the signal input and Direct Power 
On boots up the projector automatically when the power is connected.

Selectable Instant Restart function enables you to restart the projector immediately 
within 90 seconds after turning it off.

Various 3D formats make the 3D function more flexible. By presenting the depth of the 
images, you can wear BenQ 3D glassed to enjoy the 3D movies, videos and sporting 
events in a more realistic way.

• 

The apparent brightness of the projected image will vary depending on the ambient lighting conditions, 

selected input signal contrast/brightness settings, and is directly proportional to projection distance.

• 

The lamp brightness will decline over time and may vary within the lamp manufacturers specifications. This 

is normal and expected behavior.