Benq Dlp Projector MS521 Manuel D’Utilisation

Operation

44

The On-Screen Display (OSD) menus can be set according to your preferences. The 

following settings do not affect the projection settings, operation, or performance. 

• Menu display Time in the SYSTEM SETUP: Basic > Menu Settings menu sets 

the length of time the OSD will remain active after your last key press. The time length 
ranges from 5 to 30 seconds in 5-second increments. Use 

/

 to select a suitable 

time frame.

• Menu Position in the SYSTEM SETUP: Basic > Menu Settings menu sets the 

OSD position in five locations. Use 

/

 to select a preferred position.

• Language in the SYSTEM SETUP: Basic menu sets your familiar language for the 

OSD menus. Use Enter to select your language. 

• Reminder Message in the SYSTEM SETUP: Basic > Menu Settings menu sets 

whether to display reminder messages on screen. Use 

/

 to select your desired 

setting.

• Splash Screen in the SYSTEM SETUP: Basic menu sets a preferred logo screen 

to be displayed during projector start-up. Use 

/

 to select a screen.

• Using the remote control. 
Press SmartEco and Highlight Lamp Mode and press 

/

 to select Normal/

Economic/SmartEco/LampSave.

• Using  the  OSD  menu.
1.

Press Menu/Exit and then press 

/

 

until the SYSTEM SETUP: Advanced 
menu is highlighted.

2.

Press  

to 

highlight 

Lamp Mode and press 

Mode/Enter. The Lamp Settings page 
displays.

3.

Highlight Lamp Mode and press 

/

 to 

select Normal/Economic/SmartEco/LampSave. The lamp brightness vary from 
the different lamp mode,see the description list in table below.

Normal

100% lamp brightness

.

Economic

Saves 20% lamp power consumption.

SmartEco

Saves up to 80% lamp power consumption depending on the content 
brightness level and keeps the image as bright as it is in normal mode. 

LampSave

Saves up to 80% lamp power consumption to offer the longest lamp 
life.