Benq Digital Projector MP782 ST Manuel D’Utilisation
Operation
44
Shutting down the projector
1.
Press
Power and a confirmation message will
be displayed prompting you.
If you don't respond in a few seconds, the
message will disappear.
message will disappear.
2.
Press
Power a second time. The POWER
indicator light flashes orange, the projection lamp
shuts down, and the fans will continue to run for
approximately 90 seconds to cool down the
projector.
shuts down, and the fans will continue to run for
approximately 90 seconds to cool down the
projector.
To protect the lamp, the projector will not respond to any commands during the cooling
process.
To shorten the cooling time, you can also activate the Quick cooling function. See
process.
To shorten the cooling time, you can also activate the Quick cooling function. See
for details.
3.
The POWER indicator light is a steady orange and
fans stop. Disconnect the power cord from the power
outlet.
fans stop. Disconnect the power cord from the power
outlet.
•
If the projector is not properly shut down, to protect the
lamp, when you attempt to re-start the projector, the fans
will run for a few minutes to cool down. Press Power
again to start the projector after the fans stop and the
POWER indicator light turns orange.
lamp, when you attempt to re-start the projector, the fans
will run for a few minutes to cool down. Press Power
again to start the projector after the fans stop and the
POWER indicator light turns orange.
•
Lamp life results will vary depending on environmental
conditions and usage.
conditions and usage.