Belkin F1DP116Gea Manuel D’Utilisation

64

Initiate AutoScan

↑↓

Navigate to the next field

Highlight field for editing

Return to the main OSD menu

Program Monitor-DDC2 settings to all Server 
Interface Modules

Change options for selected field

This specifies whether the AutoScan feature is enabled or not. To enable or 
disable the AutoScan feature, use the arrow keys to navigate to the Scan field 
and press the space bar.

This specifies the amount of time the Switch remains on a server before switching 
to the next server while in AutoScan mode. You may set the scan-time interval 
to anywhere between 1 and 99 seconds. To change the scan time, use the arrow 
keys to navigate to the Scan Time field, and type in the desired time interval 
(in seconds). 

This feature allows you to enable an administrator password to prevent 
unauthorized users from accessing the OSD. To enable or disable the Security 
feature, use the arrow keys to navigate to the Security field and press the 
space bar. 

Note: It is recommended that you do not enable local security if you will be 

accessing the remote session often.

This allows you to specify the administrator password needed to access the OSD 
when the Security feature is enabled. To set the password, use the arrow keys to 
navigate to the Admin-Password field and type in the desired password. You may 
use up to eight uppercase characters for the password. Password characters are 
not case-sensitive. Press “Esc” or use the arrow keys to navigate to fields and 
save the password. Use the “Back Space” key to erase the password.

Using the Switch from a Local Console