Behringer T-47 Manuel D’Utilisation
5
TUBE CONDENSER MICROPHONE T-47 User Manual
Set-up
3.
Mounting the microphone
The microphone comes with an elastic shockmount. The advantage to a
conventional microphone stand mount is that mechanically induced noise is
virtually absorbed.
conventional microphone stand mount is that mechanically induced noise is
virtually absorbed.
To mount the microphone, attach the shockmount to the microphone stand
and, from above, slide the T-47 into the shockmount.
and, from above, slide the T-47 into the shockmount.
Caution
!
The provided shockmount is not intended to be used for
◊
suspending the T‑47!
Alternatively, you can also mount the T-47 on a microphone stand mount.
There is a screw adapter on the bottom side of the microphone.
There is a screw adapter on the bottom side of the microphone.
Warming up
The T-47 can basically be used a couple of seconds after the PSU-T has been
switched on. However, the typical sound of the the T-47 only unfolds a while
after activating the power supply. We recommend allowing the microphone
to “warm up” 30 minutes before use.
switched on. However, the typical sound of the the T-47 only unfolds a while
after activating the power supply. We recommend allowing the microphone
to “warm up” 30 minutes before use.