Behringer MINIAMP AMP800 Manuel D’Utilisation
5
MINIAMP AMP800 User Manual
(1)
(2) (3)
(4)
(5)
(6)
(7)
(8)
Fig. 2.1: AMP800 front panel
In the previous illustration, each control element is associated with a
callout, for example
(1)
. In this section, use these callouts to identify
details about each control element. For each Input Channel (A and B),
the front panel includes control elements
(1)
and
(2)
. To manage the
signal in each of these Input Channels, use these control elements:
(1)
LEVEL control: To adjust the input level of a signal,
turn this control toward 0 (minimum level) or,
alternatively 6 (maximum level).
(2)
BALANCE control: To adjust the stereo image of a signal,
turn this control toward L (left) or, alternatively R (right).
(3)
A + B meter: To monitor the combined level of both signals
(A and B), use this meter. An LED glows next to the value that
identifies the combined level (-24 dB to 0 dB). If the signal is too
strong, the CLIP LED glows. Most of the time, the optimal level
is 0 dB (a full signal).
For each Headphone Channel (1, 2, 3, and 4), the front panel includes
control elements
(4)
through
(7)
. To manage each Headphone
Channel, use these control elements:
(4)
(headphone) connector: To connect a headphone,
use this stereo, ¼" TRS connector. For details about TRS plugs,
see 4. Audio Connections.
(5)
INPUT button: To select an Input Channel, push this button.
When you listen to:
•
Input Channel A, this button is not pushed in and not lit
•
Input Channel B, this button is pushed in and lit
(6)
PHONES LEVEL control: To adjust the level of a headphone
signal, turn this control toward 0 (minimum volume) or,
alternatively 6 (maximum volume).
(7)
CH meter: To monitor the level of a headphone signal, use this
meter. An LED glows next to the value that identifies the
headphone volume (-24 dB to 0 dB). If the signal is too strong,
the CLIP LED glows. Most of the time, the optimal volume is
0 dB (a full signal).
(8)
(power) button: To turn the AMP800 on and off, push this
button. When you turn the AMP800:
•
on, this button is pushed in and lit
•
off, this button is not pushed in and not lit
◊
When you finish using the AMP800, unplug the power supply
unit from the power source. As long as the power supply
unit is connected to a power source, the power supply unit
consumes energy.
2. Control Elements
The AMP800 is a headphone amplifier that includes 4 Headphone
Channels, so you can share the
AMP800 with other musicians. In addition, each musician can choose
AMP800 with other musicians. In addition, each musician can choose
between 2 audio channels: Input Channel A and Input Channel B.
◊
Ensure that only qualified personnel set up and operate
the AMP800.
2.1 Front panel
This section describes how to use the front panel of the AMP800,
illustrated as follows: